SvanCare Balance 10 101 Installationsanleitung Seite 33

No Part
16 Locking pin
17 Plastic ball
18 Countersunk screw
19 Screw (included in attachment tube for support handle)
20 Bushes for stabilisation (included in toilet seat mounting kit)
21 Nut (included in toilet seat mounting kit)
22 Footrest replacement
23 Footrest
24 Screw (included in footrest replacement)
25 Screw (included in toilet seat mounting kit)
26 Protective cover (included in toilet seat mounting kit)
27 Pin bracket (included in toilet seat mounting kit)
28 Gasket (included in toilet seat mounting kit)
29 Washer (included in toilet seat mounting kit)
30 Spanner (included in toilet seat mounting kit)
Check that Balance is firmly attached to the toilet and that it is installed correctly before use.
As required, clean the product with a mild detergent and water. Disinfect where necessary.
Completely disassemble the product. Each of the parts should be thoroughly washed with
non-abrasive detergent, rinsed with water and dried. Disinfect. Check all the parts for wear and
replace where necessary.
Balance is constructed from lacquered stainless steel and its details from polyurethane without
latex. The toilet seat is made of recycled wood fibre with a coating of polyester that is lacquered
(without latex). Its fittings are of metal. When they are to be disposed of, the toilet seat, footrest
and rubber cover are sent for incineration or recycling. The metal parts are recycled as metal.
Balance can be combined with several of Svan Care's products, e.g. Bidette, Hole Reducer,
Back Cushion etc. These are accompanied by their own user manuals.
Important!
Balance should only be installed on toilets that
are well anchored to the floor or wall.
Never leave a person using Balance unattended.
Use only original Svan Care accessories. Svan
Care assumes no responsibility for the product
if it is used, altered or installed in any way other
Cleaning
Reconditioning
Materials, environment and recycling
Specifications
Use
than as specified in this user manual.
Maximum loads:
75 kg/Armrest (150 kg/pair),
75 kg/Armrest Surround (150 kg/pair),
75 kg/Support handle (150 kg/pair),
Support leg 150 kg, Footrest 60 kg
Estimated technical life: 5 years
33
Item number
10 008
10 009
Included in 10 002
Included in 10 031
Included in 10 142
Included in 10 142
10 038
10 039
Included in 10 038
Included in 10 142
Included in 10 142
Included in 10 142
Included in 10 142
Included in 10 142
Included in 10 142