Self-Emptying Base And Robot Preparation - Obode A8+ Kurzanleitung

Quick Start Guide
1
Tidy the room
Prior to use, put in order furniture including tables and
chairs, as well as floor fans and other objects, and gather
weighing scales, wires and other lower objects in order
for maximum cleaning space. Do not use the mopping
function on floor carpets.
Self-emptying
base and robot
preparation
2
Install side brushes
4
Bluetooth matching
Press " " for 3 seconds, the
machine automatically matches
with the self-emptying base after
turning on, and then machine plays
the "beep" prompt.
Notes
For quick guide of using APP, please refer to "Recommended steps to use APP."
Peel o the protection film
3
Place the self-emptying base
Put extra power cords
in their storage slot
5
Network pairing
Press and hold down the "
button for 3 seconds until a beep
is heard. The "
should start to flicker. Follow
instructions on app for next steps.
Remove the protection bar
0.5m
1.5m
6
"
" indicator light
Briefly press it for 1 second
to start/pause
Remove the retainer
0.5m
0.5m
Start to clean
Water inlet/outlet
Fill the tank with
water