Werbung
Verfügbare Sprachen
Verfügbare Sprachen
ventilation slots of the appliance clean and
clear of debris to prevent overheating.
Troubleshooting
In case your weed burner does not function
correctly, please see below for some of the
possible causes and their respective solutions:
• The motor is overheating.
• The ventilation slots of the weed burner are
clogged up.
Unplug the appliance from mains power
and clear the ventilation slots of dirt and
debris.
• The weed burner does not start when it is
switched on.
• Interruption in the electrical circuit.
Check the mains lead and the mains
plug.
• The switch is defective.
Unplug the appliance from mains power,
because there is a possible fire hazard.
Have the weed burner serviced by your
local dealer.
• The motor does not work, but the weed burner
does heat up.
• Interruption in the electrical circuit.
Immediately switch off the appliance and
unplug it from mains power. because
there is a fire hazard!
Have the weed burner serviced by your
local dealer.
ENVIRONMENT
Faulty and/or discarded electrical or
electronic apparatus have to be
collected at the appropriate recycling
locations.
10
Only for EC countries
Do not dispose of power tools into domestic
waste. According to the European Guideline
2012/19/EU for Waste Electrical and Electronic
Equipment and its implementation into national
right, power tools that are no longer usable must
be collected separately and disposed of in an
environmentally friendly way.
WARRANTY
FERM products are developed to the highest
quality standards and are guaranteed free of
defects in both materials and workmanship for
the period lawfully stipulated starting from the
date of original purchase. Should the product
develop any failure during this period due to
defective material and/or workmanship then
contact your FERM dealer directly.
The following circumstances are excluded from
this guarantee:
• Repairs and or alterations have been made
or attempted to the machine by unauthorized
service centers.
• Normal wear and tear.
• The tool has been abused, misused or
improperly maintained.
• Non-original spare parts have been used.
This constitutes the sole warranty made by
company either expressed or implied. There are
no other warranties expressed or implied which
extend beyond the face hereof, herein, including
the implied warranties of merchantability and
fitness for a particular purpose. In no event
shall FERM be liable for any incidental or
consequential damages. The dealers remedies
shall be limited to repair or replacement of
nonconforming units or parts.
The product and the user manual are subject
to change. Specifications can be changed
without further notice.
Werbung
