Strebe
VSRS / VSRV
Betriebsanleitung
Diese Betriebsanleitung/Herstellererklärung muss
über die gesamte Nutzzeit aufbewahrt werden und mit dem
Produkt weitergegeben werden.
ORIGINALBETRIEBSANLEITUNG
RUD Ketten
Rieger & Dietz GmbH u. Co. KG
73428 Aalen
Tel. +49 7361 504-1370
sling@rud.com
www.rud.com
EG-Konformitätserklärung
entsprechend der EG-Maschinenrichtlinie 2006/42/EG, Anhang II A und ihren Änderungen
Hersteller:
RUD Ketten
Rieger & Dietz GmbH u. Co. KG
Friedensinsel
73432 Aalen
Hiermit erklären wir, dass die nachfolgend bezeichnete Maschine aufgrund ihrer Konzipie-
rung und Bauart, sowie in der von uns in Verkehr gebrachten Ausführung, den grundle-
genden Sicherheits- und Gesundheitsanforderungen der EG-Maschinenrichtlinie
2006/42/EG sowie den unten aufgeführten harmonisierten und nationalen Normen sowie
technischen Spezifikationen entspricht.
Bei einer nicht mit uns abgestimmten Änderung der Maschine verliert diese Erklärung ihre
Gültigkeit.
_____________________________________________
Strebe (ohne Gehänge)
Produktbezeichnung:
_____________________________________________
VSRV / VSRS
Folgende harmonisierten Normen wurden angewandt:
___________________ ___________________
DIN EN 1677-1 : 2009-03
___________________ ___________________
___________________ ___________________
___________________ ___________________
___________________ ___________________
Folgende nationalen Normen und technische Spezifikationen wurden außerdem angewandt:
___________________ ___________________
DGUV-R 109-017 : 2020-12
___________________ ___________________
___________________ ___________________
___________________ ___________________
___________________ ___________________
Für die Zusammenstellung der Konformitätsdokumentation bevollmächtigte Person:
Michael Betzler, RUD Ketten, 73432 Aalen
Hermann Kolb, Bereichsleitung MA
Aalen, den 01.06.2022
_____________________________________________
Name, Funktion und Unterschrift Verantwortlicher
DIN EN ISO 12100 : 2011-03
DIN 15428 : 1978-08
Strebe VSRS / VSRV
EC-Declaration of conformity
According to the EC-Machinery Directive 2006/42/EC, annex II A and amendments
RUD Ketten
Manufacturer:
Rieger & Dietz GmbH u. Co. KG
Friedensinsel
73432 Aalen
Germany
We hereby declare that the equipment sold by us because of its design and construction,
as mentioned below, corresponds to the appropriate, basic requirements of safety and
health of the corresponding EC-Machinery Directive 2006/42/EC as well as to the below
mentioned harmonized and national norms as well as technical specifications.
In case of any modification of the equipment, not being agreed upon with us, this declara-
tion becomes invalid.
Product name:
_____________________________________________
Spreader bar
_____________________________________________
VSRV / VSRS
The following harmonized norms were applied:
___________________ ___________________
DIN EN 1677-1 : 2009-03
___________________ ___________________
___________________ ___________________
___________________ ___________________
___________________ ___________________
The following national norms and technical specifications were applied:
___________________ ___________________
DGUV-R 109-017 : 2020-12
___________________ ___________________
___________________ ___________________
___________________ ___________________
___________________ ___________________
Authorized person for the configuration of the declaration documents:
Michael Betzler, RUD Ketten, 73432 Aalen
Hermann Kolb, Bereichsleitung MA
Aalen, den 01.06.2022
_____________________________________________
Name, function and signature of the responsible person
DE
DIN EN ISO 12100 : 2011-03
DIN 15428 : 1978-08
Streben
1