physa DIVINE Bedienungsanleitung Seite 5

USER MANUAL
Bedienungsanleitung | Manuel d´utilisation | Istruzioni per l'uso | Manual de instrucciones | Instrukcja
1. PARAMETER
Item Divine
Basic configuration Elliptical pillow, hemicycle pillow
Damageable parts PU cover, hand controller
molding PU cover size
Upper limit
Lowest limit
Back adjustment angle
Foot adjustment angle
Technical parameter
Bed load limits of up and
down
N.W
2. INSTALLATION STEPS
1) Open the box; place the bed to the proper position.
2) Connect the power and then you can use it, as the pictures below show.
3. BRINGING INTO SERVICE
Take the massage bed out of the box and then remove the foil.
Attention: Do not remove the foil with scissors or knives.
Connect the remote control and plug the power cord into an outlet.
Now you can start adjusting the height by using the remote control. As there is only
one available port, you can either connect the remote control or the foot control.
1970x700x80mm Toleranz: ±2%
860±10%
530±10%
-20°~65°Tolerance: ±10%
0~+20°Tolerance: ±10%
200kg
71kg
9