Cherry G84-4700 Bedienungsanleitung Seite 4

The characters appear on the screen to
check. Previous configurations will be
overwritten.
3 Press Num to exit the configuration
mode.
You can also program a level of the
keypad virtually with CHERRY Tools
EN
software. The configuration is saved as a
file on the PC and not in the keypad
memory. You can obtain the latest version
of the software from the internet at:
www.cherry.de.
3 Operating modes
The keypad has 4 operating modes which
differ in the function of the keys.
3.1 Changing the operating
mode
• Press and hold down the keys in the
appropriate sequence: Num, Number
key for the mode, Enter.
• Example: To get mode 1, press Num, 1
and Enter.
The mode remains after switching off
the system.
4
3.2 Mode 1 (standard
function)
In mode 1, the keypad responds in the
same way as a standard keypad. When
you press Num, the Num status changes
in the system, as well as in another
connected keypad.
3.3 Mode 2 (Num status only
on keypad, alternative
decimal separators)
When you press Num in mode 2, the Num
status only changes on the keypad.
In this mode, you can change the use of
the Comma key.
1 Press and hold down the keys in the
appropriate sequence: Num, Comma
and Enter.
• Each time this combination is pressed,
the use of the Comma key is as follows:
Comma, Point, 00 and 000.
2 Check the setting on the screen.
3.4 Mode 3 (French operating
system)
You must use this mode so that the
keypad gives the printed character for a
French operating system.
When you press Num in mode 3, the Num
status only changes on the keypad.
The configuration of the Comma key
cannot be changed.
3.5 Mode 4 (free configuration)
In mode 4, you can configure any key.
See 2 "Configuration".
4 Restoring the keypad
to its delivery status
• Press and hold down the keys in the
appropriate sequence: Num, Minus and
Enter.
The keypad is restored to its delivery
status. However, the configuration of the
decimal separator characters in mode 2
is retained.
5 Cleaning the device
CAUTION: Damage may be
caused by harsh cleaning
agents or liquids in the device
• Do not use solutions such as gasoline
or alcohol and scouring agents or
scouring foam for cleaning.
• Avoid allowing fluids to enter the
device.