Mark FS01 Bedienungsanleitung Seite 13

5.CHANGE RINGTONES:
Press the Up Button or Down Button to
choose your favorite ringtones;
Then repeat the pairing instruction of Step 4.
6.RESET
Press Down Button for 5 seconds to reset
receivers to default. When receiver sounds 'Ding
Dong' with LED flashing that means the reset was
successful. If any issues by accident in use, please
reset it first, then you can follow the Step 4
to pair again.
Note:
(1)Pairing mode will last only 5 seconds before
timing out. Ensure you activate the transmitter
during this time or the process will have to start
again.
(2)Pairing mode will quit automatically after paring
is successful.
12