Soundcore P3 Bedienungsanleitung Seite 8

2. Press and hold the button on the case for 10 seconds until the 3 LED indicators
flash white for 3 times and then flash white in sequence continuously. This
confirms that the reset was successful and your earbuds can be connected
normally.
1
Specifications
Specifications are subject to change without notice.
Input
Battery capacity
Charging time
Playtime (varies by volume level and
content)
Playtime (with ANC mode turned on)
Driver size
Frequency response
Impedance
Waterproof level
Bluetooth version
Bluetooth range
2
5 V 0.35 A
63 mAh x 2 (earbuds); 800 mAh (charging
case)
3 hours
Up to 10 hours (Total 50 hours with the
charging case)
Up to 9 hours (Total 40 hours with the
charging case)
11 mm x 2
20 Hz - 20 kHz
16 Ω
IPX5
V 5.2
15 m / 49 ft
06 EN