Hardwareinstallation - Nvidia TURING T1000 Schnellstartanleitung

03
HARDWARE
INSTALLATION
1
Remove the current graphics driver installed on the host system.
2
Power down your system.
3
Unplug the power cord from the AC power source.
4
Remove the side panel from your system to gain access to the motherboard.
Note: Reference your specific computer documents for instructions
on accessing the motherboard in your computer.
5
Remove the existing graphics card if present. If a retention bar is holding
the card in place, remove the screw securing the card.
OR, If there is no existing graphics card, remove the access covers from
the primary x16 PCI Express slot.
The T1000, T600, and T400 are single-slot
cards and only require a single slot.
EN