Hardwareinstallation - Nvidia QUADRO SYNC II Schnellstartanleitung

02
HARDWARE INSTALLATION
1 Place the Quadro Sync II card into a free PCI or PCI Express slot.
2 Connect the included cables between the Quadro Sync II card and
Quadro GPU board.
3 Connect either a 6-pin PCI power cable or SATA hard drive power cable.
Note: Make sure to connect to the connector labeled "SYNC"
on the Quadro GPU board.
Note: Visit www.nvidia.com/sync for detailed system
requirements, driver configuration information, multiple
Quadro Sync II card configuration instructions and a
complete User Guide.
EN