Navitel R500 GPS Benutzerhandbuch Seite 25

24 | USER MANUAL
Installation
1. Put the microSD card into the DVR. Use a high-speed SD card (Class U3 or above); capacity should be within 8-128 GB.
• To avoid malfunctions of the DVR and/or SD-card, don't insert and remove SD-card during DVR operation.
• Before using a microSD card, please format it inside the DVR to avoid data errors. To format the SD-card in Menu mode select Format SD-
card and confirm it.
2. Secure the device on the windshield with the holder.
EN
3. Connect the car charger to the cigarette lighter socket.
4. Connect the car charger to the GPS antenna input (mini-USB). When connecting the car charger directly to the DVR mini-USB port, the GPS operation
is not available.
5. Adjust the camera position.
6. Turn the power on; check whether the device is installed correctly. If the device is installed correctly, the indicator will glow blue; the device will start
up and begin recording (indicated by flashing blue light).
Precautions
• Use only the original charging adapter. Use of another adapter may negatively affect the device's battery. Use accessories only approved by the
manufacturer.
• Permissible ambient temperature in operating mode: -20 to +60 °С. Storage temperature: -30 to +80 °С. Relative humidity: 5% to 90% without condensation
(+25 °С).
• Keep the device away from fire sources to avoid explosion or fire.
• Do not expose the device to physical impacts.
• Keep the device away from sources of electromagnetic radiation.
• Keep the lens clean. Do not use chemicals or detergents to clean the product; always turn off the device before cleaning.
• Strictly follow the laws and regulatory acts of the region where the device is used. This device cannot be used for illegal purposes.
• Do not disassemble or repair the device by yourself. In case of the device failure, contact the service center.