Werbung
Verfügbare Sprachen
Verfügbare Sprachen
9 Operation
Frist open time: 120s, and close time 5 to 8 min. according to working temperature.
After installation and preliminary testing, the device will act according to the PDM controller.
The operating status of the actuator can be observed depending on its position, open or
closed.
10 Troubleshooting
Problem
Possible cause
The actuator does not work.
Imperfect electrical contact.
The actuator is too slow.
Undersized actuator.
11 Cleaning and care
Important:
– Do not use aggressive cleaning agents, rubbing alcohol or other chemical solutions.
They damage the housing and can cause the product to malfunction.
– Do not immerse the product in water.
1. Disconnect the product from the power supply.
2. Clean the product with a dry, fibre-free cloth.
12 Disposal
This symbol must appear on any electrical and electronic equipment placed on the
EU market. This symbol indicates that this device should not be disposed of as
unsorted municipal waste at the end of its service life.
Owners of WEEE (Waste from Electrical and Electronic Equipment) shall dispose
of it separately from unsorted municipal waste. Spent batteries and accumulators,
which are not enclosed by the WEEE, as well as lamps that can be removed from
the WEEE in a non-destructive manner, must be removed by end users from the
WEEE in a non-destructive manner before it is handed over to a collection point.
Distributors of electrical and electronic equipment are legally obliged to provide free take-back
of waste. Conrad provides the following return options free of charge (more details on our
website):
in our Conrad offices
at the Conrad collection points
at the collection points of public waste management authorities or the collection points set
up by manufacturers or distributors within the meaning of the ElektroG
End users are responsible for deleting personal data from the WEEE to be disposed of.
It should be noted that different obligations about the return or recycling of WEEE may apply in
countries outside of Germany.
13 Technical data
13.1 Power supply
Input voltage/current ..................... 220 - 240 V/AC, 50/60 Hz, 50 mA
Power consumption ...................... 1.5 W
Max. starting current ..................... 50 mA
13.2 Environment
Operating temperature ................. 0°C to +50°C
Storage temperature ..................... 0°C to +50°C
13.3 Other
Dimensions ................................... 42 x 62 mm (ø x H)
Weight .......................................... 190 g
Cable ............................................ 2 x 0.75 mm², 100 cm
Valve connection .......................... M30 x 1.5 mm
Closing force ................................. 110 N
Suggested solution
Check and reconnect
contacts.
The actuator works within
the parameters if the closing
or opening time is approx.
8 min.
This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com). All rights in-
cluding translation reserved. Reproduction by any method, e.g. photocopy, microfilming, or the capture in electronic data
processing systems require the prior written approval by the editor. Reprinting, also in part, is prohibited. This publication
represents the technical status at the time of printing.
Copyright 2023 by Conrad Electronic SE.
*2886727_V1_0923_02_m_VTP_2L
Werbung
