GB
Counting direction
The forward/backward input (cw/ccw)
determines the Encoder's counting direction.
If not connected, this input will be "HIGH".
When, looking at Encoder shaft and rotating
clockwise (right turn), the encoder will count
in ascending sequence. However, if it is requi-
red that the encoder counts in ascending
sequence, with anticlockwise rotation, then
this connection must be permanently
connected to the "LOW" level (GND).
Issue 08 / 03
The right to make technical changes is reserved
•
Absolute Encoder
ATM 90 SSI
Maintenance advice
ATM90 Encoders are maintenance-free.
We recommend regularly
- checking the mechanical fixings.
- checking the screw connections and
plug-in connections.
915 040 703 356