Werbung
Verfügbare Sprachen
Verfügbare Sprachen
USER MANUAL
INSTRUMENT MICROPHONE
Condenser Microphone for Wind Instruments
The OMNITRONIC
characteristic designed for wireless applications on stage and in recording studios. It is ideally suited
for direct pick-up of woodwind and brass instruments. The microphone connection cable with
balanced mini XLR plug serves for connecting a pocket transmitter. The microphone is supplied with
in stable transport box. For operation, the microphone requires 9-52 V phantom power.
Safety Instructions
Ÿ
Maintenance and service operations are only to be carried out by authorized dealers. Damage,
caused by manual modifications on this device is not subject to warranty. If the microphone is used
for other purposes than originally intended or if it is not correctly connected, the product may suffer
damages and the guarantee becomes void.
Ÿ
Protect the microphone against humidity and heat. The ambient temperature must always be
between -5° C and +45° C.
Setting into Operation
Clamp the spring clamp at your instrument.
1
Adjust the microphone to the sound source.
2
Place the windshield.
3
Connect the microphone via its connection cable with mini XLR plug to the XLR microphone input
4
of your pocket transmitter. The input must provide phantom power.
1
Cleaning
For cleaning the microphone only use a dry cloth. Never use chemicals or water.
Technical Specifications
Type:............................Condenser
Directivity pattern:........Cardioid
Frequency range: ........50 Hz - 18 kHz
Impedance:..................220
Sensitivity: ...................-64 dB
Max. SPL:....................130 dB
Phantom power: ..........9-52 V
Connection: .................cable with 3-pin mini XLR plug, balanced
Weight: ........................650 g
Please note: Every information is subject to change without prior notice. 10.07.2009 ©
IC-1100 PRO
is a light and compact condenser microphone with cardioid
2
W
3
www.omnitronic.com
IC-1100 PRO
4
00052354.DOC, Version 1.0
Werbung
