Display Information; Display Brightness; Wireless Charging - Soundmaster Ur124 Bedienungsanleitung

DISPLAY INFORMATION

• In radio mode, press the
time to the current radio frequency.

DISPLAY BRIGHTNESS

• In standby mode, press the "DISPLAY DIMMER" button to change the brightness level of
the display (off, low, medium or high).
Supports:
• Wireless charging phones (also works with plastic cases up to 3mm thick)
• Wireless earphones with wireless charging case
Place phones face up on the wireless charging pad as pictured below:
WARNING:
Remove metal protective or magnetic case from phone before charging. When charging phone, do not
place magnetic-striped or other metal objects on the charger. Doing so could damage the object or this
unit.
Check the wireless charging indicator on the clock display to monitor the charging status.
Charging status indicator
Note:
When an iOS device is fully charged, the LED indicator light may remain lit.
Radio reception may be limited during the charging process.
Wörlein GmbH
Gewerbestrasse 12
D 90556 Cadolzburg
Germany
The current instruction manual can be downloaded from www.soundmaster.de.
Technical changes and misprints reserved.
Copyright by Woerlein GmbH, 90556 Cadolzburg,
Duplication only with the permission of Woerlein GmbH
"<" or ">"
button once to briefly change the display from the clock

WIRELESS CHARGING

The LED lit green:
The LED becomes red:
The LED is red blinking: Device is not charging properly.
IMPORTER
Tel.: +49 9103 71 67 0
Fax.: +49 9103 71 67 12
Email: service@soundmaster.de
Web: www.soundmaster.de
Device is charging properly.
Device is charged.
Reposition device.
www.soundmaster.de
4
UR124 / English Instruction Manual