1. M6 x 14 Torx screws [B8]
2. Rear fender [B1]
M6 x 14 Torx screws [B8]
8. Secure the rear fender onto the swing arm by using two (2) rivets [B7] and the #8-32 screw [B6].
1. #8-32 screw [B6]
2. Rivets [B7]
#8-32 screw [B6]
9. Reinstall the rear fender trim previously removed by using the M6 x 14 Torx screw [B8].
tightening torque
5.5 ± 0.5 N•m (49 ± 4 lbf•in)
tightening torque
3.5 ± 0.5 N•m (31 ± 4 lbf•in)