Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Guide for first time use
1. Support smartphones and tablets with Android 4.4&iOS 10.0 and above.
2. Scan the below QR code or search in APP store or Google to download "Mi Home"
APP.
3. Open Mi Home App and register a "Mi Home" account or log in directly if you
have an account.
4. Connect your phone to the internet. Please ensure that the Wi-Fi network is
available and can access the internet normally (the product does not support 5G
network)
5. Take out the Hub & Remote and connect the power cable and adapter (the
adapter needs to be configured by yourself, DC5V 1A with USB port).
6. Remove the battery compartment of Yeelight Automatic Curtain Opener, remove
the battery separator, install the battery compartment again, and charge the
Yeelight Automatic Curtain Opener for the first time for more than 3 hours, until
the white indicator stops flashing (It takes about 6 hours to fully charge)
7. Open the "Mi Home" APP, click "+" in the upper right corner of the home page,
and add devices according to the APP prompts. Note: Please set the route after
installing the product on the track accurately, see the next page for the
installation instruction. Tip: Due to the upgrade and update of the "Mi Home"
APP, the actual operation may be slightly different from the above description,
please operate according to the current "Mi Home" APP.
8. You can link multiple third-party services to your Mi Home account.
Installation
Yeelight Automatic Curtain Opener (C-shaped track) only support C-shaped curtain track.
The cross-section of the curtain track and the matching size are shown in the figure
below.
Notice:
If you need to install it on I-shaped and O-shaped tracks, please purchase the
corresponding version of Yeelight Automatic Curtain Opener.
Please ensure that the bottom of the C-shaped track is flat, and the dimensions
of the track meet the requirements in the figure.
Alexa, close the curtain
5
Werbung
