Karsten Peach BEAUTY Bedienungsanleitung Seite 2

EN
Thank you for purchasing our facial steamer. This manual will provide instructions for e ective
and safe use of the product. Please read it carefully before use and store the manual in a safe
place for future reference. If you ever pass the product on to others, this manual should be
included.
1. Technical data
Material: ABS
Power: 300W, 110-240V, AC 50/60HZ
Dimensions: 12.5 x 12.6 x 18 cm
Weight: 650 g
Steam temperature: approx. 40 °C
Working time: approx. 15 minutes
2. Description of parts
1. Handle
2. Steam outlet
3. Power button
4. Water tank (90 ml)
5. Power cord
3. Safety instructions
• For intended use only, as described in this manual.
• The product is safe to use by children from the age of 8 and by persons with reduced
physical or mental capabilities, or with lack of experience or knowledge, but only under
supervision of an adult and with taking into account any hazards.
• Maintenance should be done by or under the supervision of an adult.
• Before use, inspect the device. Do not use in case of damage.
• Do not operate where aerosol (spray) products are being used.
• Keep away from sources of ignition.
• Do not place, store or use the product near water.
• Do not let moisture come into contact with any electrical parts.
• Never touch the device or its plug with wet hands.
• Do not remove the water tank while the device is switched on or within 10 minutes after use,
as this may cause a burn hazard.
• Do not place near heat sources such as radiators, cookers, etc.
• Do not leave the product unattended when in use.
• Do not cover the device or your head when in use.
• Do not insert any object into an opening of the product.
• Do not carry the product by the cord or use it as a handle.
• Do not wrap the cord around the product.
• Keep the cord out of harm's way.
• If you have any concerns regarding your health, consult your specialist before use.
• Do not use this product as a substitute for medical attention.
• Do not use in case of a heart condition or skin conditions like eczema.
• Before use, remove contact lenses.
• Do not use on sensitive, irritated or damaged skin.
• Stop use immediately in case of irritation or pain.
• Place the product on a solid level surface.
1
2
4
3
5
• Keep the device upright.
• Do not place anything on top.
• The device does not switch o automatically.
• Do not attempt to repair, disassemble or alter the product yourself.
4. Operation
1. Make sure the facial steamer is unplugged and cool to the touch.
2. Remove the water tank and fill it with distilled water.
Tip: Filling the water tank with warm water (< 40 °C) reduces heating-up time.
3. Make sure the device and your hands are completely dry before connecting the facial
steamer to the mains.
4. Turn it on and wait for the device to generate steam (about 30 seconds).
Note:
• Keep appropriate distance (about 25 cm) and change positions regularly to avoid skin
redness.
• After each use, unplug the facial steamer to prevent it from boiling dry (after about 15
minutes).
• Wait until it has cooled down enough before refilling.
• Should you smell an unpleasant odour, please note that it will disappear after using the
product a few times.
5. Maintenance
• Always unplug and allow the device to cool down before doing maintenance work and
before long-term storage.
• After each use, empty the water tank, to prevent bacteria from spreading and any limescale
build-up.
• If necessary, clean the outside with water or a mild non-abrasive detergent. Do not use water
warmer than 40°C. Dry everything thoroughly with a clean and soft cloth.
• Store the product in a cool and dry place away from direct sunlight.
6. Disposal
Dispose of the article and the packaging materials in accordance with current local
regulations.
This product is subject to the provisions of the European Directive 2012/19/EU.
The crossed out wheelie bin symbol means that this product shall not be disposed of
with normal household waste. Electronic and Electrical Equipment not included in the
selective sorting process are potentially dangerous for the environment and human health due
to the presence of hazardous substances. Please dispose of responsibly at an approved waste
or recycling facility.
The CE marking is a certification mark that indicates conformity with health, safety
and environmental protection standards for products sold within the European Union.
The CE marking is the manufacturer's declaration that the product meets the
requirements of the applicable EC directives.
Recycling helps to reduce the consumption of resources and reduce the
environmental impact. If you wish to discard the packaging, comply to the
environmental legislation in your country.