Nowsonic KAMIKAZE Bedienungsanleitung Seite 4

Kamikaze
GB
Directional microphone
for cameras
Features
1) Power switch: Set the switch to the „ON" position to turn on the
microphone and vice versa to switch it off.
2) Switch for higher sensitivity: increases the volume of the
microphone
3) Roll-off filter: reduces ambient noise in the low frequency range
4) Battery indicator:
green = unit is powered
red = battery is low
1) Windscreen
2) Battery compartment
3) Hot shoe adapter
4) Elastic suspension: reduces mechanical noise
Operating manual
Open the battery compartment and insert the battery observing
the polarity indicated inside the compartment.
Open the clamping screw of the hot shoe adapter and mount the
microphone to the hot shoe adapter of your camera. Fix the
microphone by tightening the clamping screw of the hot shoe adapter.
Plug the 3.5 mm jack of the microphone to the microphone input
of your camera. Turn on the microphone to make it work.
If required, adjust the sound with the +10dB and the roll-off filter
switches.
Specifications
Transducer principle: electret condenser
Polar pattern: cardioid
Frequency range: 50Hz – 16kHz
Sensitivity: -32dB +/- 3dB (0dB = 1V/Pa @ 1kHz)
Roll-off filter: 10dB/octave at 60Hz
Output impedance: 2000Ω +/- 30%
Supply voltage: 1,5V AA battery
Frequency response diagram (dB ref. 1V/Pa)
Polar diagram
5
www.nowsonic.com