nor-tec 74615 Gebrauchsanweisung Seite 18

LED WORK LIGHT
Introduction
To get the most out of your new LED work
light, please read through this manual and
safety instructions before use. Please also
save the instructions in case you need to
refer to them at a later date.
Technical data
GB
Voltage/frequency:
Light output:
Light temperature:
LED service life:
Class:
Operating temperature:
Model
74615
74616
74617
74618
74620
74621
74622
74629
74630
74640
74641
74642
74643
18
230 V ~ 50 Hz
50,000 hours
-25 to +60 °C
Accessories
Mounting
Mounting
Mounting
Mounting
Sensor + mounting
Sensor + mounting
Sensor + mounting
Telescopic stand
Double with telescopic stand
Stand
Stand
Stand
Stand
Special safety instructions
Do not use the work light if the protective
glass is cracked or broken.
Check that the mounting point can bear the
load of the work light. Use suitable screws
and rawlplugs for mounting.
Work lights on stands or telescopic stands
must not be fitted as building lights.
Maintain a safety distance of at least 1
metre from the light to the object to be
illuminated.
90 Lm/watt
3,000 K
IP44
Output/Lumen
900 Lm/ 10 W
1800 Lm / 20 W
2700 Lm/ 30 W
4500 Lm/ 50 W
900 Lm/10 W
1800 Lm / 20 W
2700 Lm/30 W
4500 Lm/50 W
2×4500 Lm/ 2×50 W
900 Lm/10 W
1400 Lm / 20 W
2700 Lm/30 W
4500 Lm/50 W
Dimensions
85×85×115 mm
110×140×180 mm
135×185×225 mm
145×235×285 mm
85×85×115 mm
110×140×180 mm
135×185×225 mm
145×235×285 mm
145×235×285 mm
170×195×240 mm
240×195×275 mm
295×190×300 mm
350×190×350 mm