Description Of Control Panel - SEGAFREDO SZ PLUS Bedienungsanleitung

Description of control panel

FUNCTION
Espresso coffee Press the espresso coffee button and the machine will start dispensing the
button coffee.Whenfinished,themachinewillstopautomatically.
Long coffee Press the long coffee button and the machine will start dispensing the
button coffee.Whenfinished,themachinewillstopautomatically.
Press the continuous dispensing button and the machine will start dispen-
Continuous
sing the coffee. When the required amount of coffee is obtained, press the
dispensing
button /
Quantity setting: Keep the button pressed until the desired quantity is
Quantity
obtained and then release. With this operation, the machine memorizes the
setting
Pressthepre-infusionbutton,theiconwillflash,andselectthedesired
Pre-infusion
button
Put 1/3 of milk into a cup and place it under the steam spout (ensure that
the steam spout is immersed in the milk). Then press the button. When the
Steam button
required amount of foamy milk is obtained, press the button to stop the
Put a cup (not less than 300ml) under the steam spout, and then press the
Hot water
hot water button. When the required amount of hot water is obtained,press
button
No water Whentheindicatorflashes,itmeansthemachineisoutofwater.The
indicator
Empty waste
Whentheindicatorflashes,itmeansthedrawerofwastecapsulesisfulland
capsules
indicator
Switch
indicator
FUNCTION DESCRIPTION
button again. The max quantity is 90-110 ml.
quantity for the next use.
function from the 3 options:
steam flow.
the button again to stop the function.
machine is disabled until water is added.
needs to be emptied.
Machine on/off button.
ENGLISH
31