Ledwood DROP100 Bedienungsanleitung Seite 3

ENGLISH
CARACTÉRISTIQUE TECHNIQUES
Bluetooth
Bluetooth Max Power
Frequency response
Impedance
Input Rating
Bluetooth range
Power
Autonomy
Battery capacity
BOX CONTENT
Portable bluetooth speaker + Micro USB charging cable + User manual + AUX in jack cable.
PAIRING & CONNECTIVITY
1 Turn on the Bluetooth of your Bluetooth device.
2 turn on the speaker.
3 Choose «DROP100» from the list of found Bluetooth devices on your Bluetooth device to pair.
FUNCTION :
Speaker Light Press "LED" to switch from one light mode to another.
Micro SD/ USB/ AUX Mode
1 Insert your device
2 The speaker will then start playing music from your device
3 Press PLAY/ PAUSE to pause, press again to resume playback.
Bass
Press "BASS» to toggle between BASS and OFF BASS.
In FM mode
Short press Play/ Pause to start automatic station search, the speaker will then search for all radio frequencies and
save them.
TWS function
1 Open two same products in standby, Long press the MODE button of either one speaker, and release it after you
hear "DUDU" sound from the speaker, it means two speakers connect successfully.
2 Open the Bluetooth of your phone and search the pairing name and connected.
3 Long press MODE button again to disconnect TWS.
External Jack Function
- USB/TF :Support to play music file stored in the memory card.
- MIC jack :Connecting external microphone.
5.0
2dBM
150Hz-18KHz
3Ω
5V1A
10 mètres
100W - 10W RMS
4:00 / 40%
2400 mAh
3