Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Description of functions:
1 . Button
to mute the unit
When the unit is muted, the button is red . To unmute, click the
button again . Clicking the button
mute any units connected .
2 . Button
to identify a unit
When this button is clicked, the button and all LEDs on the unit
will flash for a few seconds .
3 . Icon
for the operating status of the unit
green = operation
red
= standby
grey = connection interrupted
Click the icon to switch between operating mode and standby
mode . When the unit is switched on and a new connection is
being established, an additional line "Startup..." with the icon
will temporarily appear at the end of the list .
4 . The two vertical bars
are basic level indicators for the input and
the output of a unit .
5 . Indication of unit name
The preset name can be changed here or in the configuration
menu (
☞
chapter 6 .3 .2) in order to distinguish between identical
units . It is advisable to use the name used in the Dante network .
All manuals and user guides at all-guides.com
in the line "All Units" will
6 . Indication of the hardware address (MAC address) of the interface
of the unit; this address will always clearly identify a unit
7 . Indication of the IP address of a unit
When the connection is interrupted, "Offline" is indicated here .
8 . Button
to call up the configuration window (fig . 8) for a unit
which is "on line"
In the line "All Units", click the button
or click
to show the list .
to hide the list of units
41
Werbung
