KBT X Gebrauchsanleitung Seite 2

INSTRUCTIONS FOR USE
SAFETY INSTRUCTIONS
1. Please keep this instruction sheet safely for future reference.
2. Please do not modify the product or the assembly details in any way. Modifications will affect the struc-
tural integrity and replacement parts will be at the buyer's expense. Inappropriate use or faulty appli-
cation of the product are explicitly forbidden and absolve the manufacturer of all liability. This product
needs to be mounted by an adult before use.
3. The use of the item is allowed only under continuous supervision by an adult. The product is not suit-
able for children under 36 months, due to a lack of extra safety precautions and taking into account
the limited mental capacities of toddlers.
4. This product meets all security aspects of the European standard EN1176. This product is fit for use in
commercial playgrounds, both indoor and outdoor.
5. The application of the item as part of a play frame or any other construction will have to be such that
it excludes all risks of entrapment.
6. Attach the bell to a vertical or horizontal beam.
7. Mount the bell in such way that the bottom of the chain of the the bell hangs at a height of 100-140cm.
Hang the bell away from openings or passages (horizontal distance min. 60 cm) and ensure that the
bell does not hang in the free space of another play element. (slide, fireman's pole)
8. All pieces should be checked regularly. For replacement material and expansion of the playground
equipment, please contact the supplier. Consequently safety will be guaranteed.
INSPECTION AND MAINTENANCE
The frequency of inspection and maintenance will vary with the type of equipment or materials used or
other factors (e.g. heavy use, levels of vandalism, coastal location, air pollution, age of equipment, ...).
Routine visual inspection (weekly to monthly)
- Always check that the bolts and nuts are securely fastened.
- Check the shock absorbing surface for objects that don't belong there.
- Check for missing parts.
- Check the equipment ground clearances.
Operational inspection (1 to 3 months)
- Check the stability of the construction.
- Check every part for excessive wear and replace when necessary.
Annual inspection (1 to 2 times per year)
- Check for rust and corrosion.
- Check every part for excessive wear and replace when necessary.
tape measure
2
All manuals and user guides at all-guides.com
pencil
bell 'X' stainless steel
TOOLS
13
drill 13 mm
EN
19
ratchet spanner with cap 19