SAL VB X1000 Bedienungsanleitung Seite 31

1. dialer, call log, phone book, BT
music playback, BT information submenu
2. "0", long touch "+"
3. deleting of the last character
4. deletion
5. start a call
6. microphone mute
7. switching sound between the radio
and the phone
8. end of call
9. step back
10. data synchronization with the phone
(required for displaying the phone book and
call log
and have to enable on the phone as wel)
the keyboard can be displayed with the arrow
button on the far right or by touching the
search field
11. deleting of the last character
12. data synchronization with the phone
(required for displaying the phone book and call log and have to enable on the phone as well )
13. previous track
14. play / pause
15. next track
● One radio can be paired with one BT device at the same time. The current range depends on
the other device and the environmental conditions (approx. 5m).
● If the telephone book and call data are not displayed after touching the synchronization button
during the BT connection, turn the ignition switch off and on again, if necessary, unplug the USB
cable for a short time. Synchronization must be enabled in the phone's pop-up window.
● By entering the first two or three characters of the name in the search engine of the phone book, you can quickly and conveniently find it in the
contact list. Tap once to select, tap twice to dial the number.
● In the case of a phone with a double SIM card, depending on its settings, it may be necessary to approve the call on the phone as well. This can
be avoided by properly setting the phone (depending on the type).
● The music player, internet radio, etc. started on the phone. application can usually be controlled remotely from the touch screen of the radio. If the
external device allows it, text and image information about the track will usually be displayed.
● The volume and sound quality of the BT connection are affected by the audio settings of the connected mobile phone. It is recommended to turn
off the tone control of the phone and use it only on the radio.
● Remember that the actual volume depends on the combined setting of the radio and telephone volume controls.
● Not all phone applications (e.g. music player) or functions can be controlled from the radio screen, depending on the properties of the external
application. In rare cases, you may need to install another compatible player application on your phone.
● Occasionally, certain characters may not be displayed correctly or not at all. This may mainly affect special or accented characters and is not a
fault of the device.
SCREEN MIRRORING - iOS MIRROR LINK
HOME / PHONELINK / iPhone Mirroring
The special feature of the device is that the image of most mobile phones with the iOS operating system above the 6th series connected via USB can
be displayed as a secondary display on the large touch screen. All applications on the mobile phone - depending on the position of the phone - are
displayed in portrait or landscape format. So, for example, music, movies and other content in the phone's memory or played from online Internet
sources, as well as Internet radios, maps, navigation applications... The management is done from the phone. It is not necessary to install an additional
application on the phone, it is only necessary to enable data sharing as a secure connection after the first - USB cable - connection. Use the floating
menu to exit!
In case of connection error:
- Unplug and plug it back in or try another USB connection cable!
- Restart your phone and check the data sharing permission!
- Check whether your iOS phone is suitable for such use (Mirror Link compatibility required)!
● If the image does not rotate on the device when you rotate the phone, check whether image rotation is enabled on the phone. You can also do this
from the local control menu that appears after tapping the white, unlabeled floating button on the car radio screen. This button can be relocated.
● The image and sound are sent to the car radio via the USB cable. Meanwhile, the phone's battery is also being charged. The BT connection must
also be active.
● The USB cable used must have a data transfer function in addition to the charging function. Usually the cable that comes included with the phone
is fine. If necessary, try another high-quality connection cable.
● In the event of a problem, disconnect the USB cable for a short time or restart the radio or the phone.
● If the mirroring of the high-definition video played by the phone is stuck, use a lower image resolution or install another video player application.
● Functional deficiencies and incompatibilities may occur due to the differences between mobile phones and the operating systems found on
them, which are not due to the fault of this device. The connection may be affected by third-party software or hardware solutions, therefore their
operation, development and changes are independent of the manufacturer of this product.
● The operation of screen mirroring and other functions according to this description cannot be guaranteed in all cases for reasons beyond the
manufacturer's control.
● Wireless (WiFi) screen mirroring is not available for this model. (Airplay)
31