sunwater 360-H120 CM Montageanleitung Seite 8

WARRANTIES - After-sales service
Swimming pool 360 - H120 cm
Warranty conditions:
The swimming pool must be assembled within 48 hours of the package being opened.
For the warranty to be valid, a concrete slab must be in place.
Our warranty covers only the replacement of defective parts. It in no way covers demands for compensation or damages. The general warranty does not apply in the following circumstances:
• Use of the equipment in a way which is not in accordance with the instructions.
• Damage incurred as a result of bad handling during and after assembly.
1) Pump : 2 year warranty (electrical problems) under normal usage conditions. The following are not covered by the warranty: Deterioration by abrasion or corrosion, deterioration due to a faulty connection,
equipment dismantled or repaired by a third party, parts breaking (pump base, prefilter cover, hose connector...), running the pump when dry. The warranty is void if the electrical cable and/or the plug are
replaced, removed or damaged
2) Liner : 2 year warranty under normal usage conditions. The following are not covered by the warranty: Punctures, holes, tears, stains (treatment products directly in the water), stains due to algae growth, stains
due to decomposition of foreign bodies in contact with the liner, stains and decolouration due to oxidising products, colourfastness and wear due to rubbing on various surfaces. Deformation of the liner left without
water for more than 24 hours (never empty your swimming pool completely).
3) Filter : 2 year warranty on non-installed products: tank, drainage plug, collar, multiport valves... The following are not covered by the warranty: Watertightness problems following use of pressure greater than the
maximum authorised pressure. (ref. filter notice).
4) Skimmer : 2 year warranty on the seal joints.
5) Wooden structure : 10 year warranty against corrosion and insect attack. The following are not covered by the warranty: Changes in wood colour due to weather, natural deformations (splitting, cracks which
in no way impair the mechanical performance of the wood). The warranty does not cover assembly or storage faults producing deformations in the wall panels (if assembled a long time after the package being
opened), deformation of the planks which in no way impairs the mechanical performance of the swimming pool.
IMPORTANT : The after-sales service will be available only at point of sale.
Essential records for claiming the warranty: - Till receipt/proof of purchase.
- Warranty slip.
- Reference number of the faulty part.
Shop :
City :
Contact department :
Direct tel :
Code Ref. Désignation
M 7514946 Plank 38 x 145 x 1485 mm
MS 7514947 Upper plank 38 x 135 x 1485 mm
2MS 7514949 Upper 1/2 plank 38 x 67,5 x 1485 mm
2MI 7514950 Lower 1/2 plank 38 x 77,5 x 1485 mm
MSS 7514951 Upper skimmer plank 38 x 135 x 1485 mm
MIS 7514952 Lower skimmer plank 38 x 145 x 1485 mm
MR 7514948 Water jet plank 38 x 145 x 1485 mm
PR 7514097 Post 45 x 135 x 1275 mm (reinforcement)
7414863 Sacrifice part 38 x 135 x 280 mm
PF 7514113 L-section finish 28 x 70 x 1260 mm
C 7514048 Console edging 45 x 230 x 170 mm
Wooden stop block for the skimmer flap
7514049
30 x 20 x170 mm
PL 7100201 Pair of rungs for wooden ladder H120/130 cm
T 7514052 Wooden ladder steps/Skimmer flap 28 x 145 x 600 mm
MSD 7514953 Pine outer right skimmer edging 28 x 145 x 387 mm
MSG 7514954 Pine outer left skimmer edging 28 x 145 x 387 mm
MGI 7514955 Pine edging 28 x 145 x 1252 mm Int.
MGE 7514956 Pine edging 28 x 145 x 1376 mm Ext.
7514149 Sandbag (25kg)
R 7514015 Hung 1,46 m hanging rails
7514750 3-step stainless steel ladder
Poolmax TP
Filtration
Flexible pipe, 8 m
S Skimmer large
Ground protection felt
Client :
Address :
City :
Tel :
Qty Qty
7514927
parcel ASS
58
Code Ref. BREAKDOWN OF THE HARDWARE KIT
3
A2 7514606 Console + reinforcer bag
4
A3 7514638 Console + reinforcer bag
4
C2 7514639 Hung rails bag
1
BT1 7514933 Bag with screws for metal plate corner connection
1
DMP1 7514617 Edging screw bag
1
E 7514145 Skimmer flap bag
8
G 7514146 Wooden ladder + finishing profile bag
2
H 7514901 Metal plate for corner connection
16
T 7514934 Screw bag for inox reinforcing strip
16
2
1
5
1
1
8
7
1
8
1
1
1
1
1
1
PR
Hardware kit
1
Qté Qté
parcel ASS
1
1
1
1
1
1
1
8
1
8
II / 16-1
7514909 Liner 50/100 blue 360 - H120
PL
T
1