Calibration Of Lift Off Sensor - Steelseries Rival 600 Bedienungsanleitung

CALIBRATION OF LIFT OFF SENSOR

Your Rival 600 is equipped with a secondary,
high precision lift off sensor. To ensure the
highest level of accuracy, the lift off sensor
must be calibrated to your gaming surface of
choice.
By default your Rival 600 is set to a ≤ 1.0 mm
lift off distance. SteelSeries Engine offers the
ability to further tweak the lift off distance.
Calibration of the lift off sensor can happen in
two ways:
Automatic
On every mouse power up (for instance,
plugging in the USB cable), your lift off sensor
will automatically calibrate.
9
find help at
STEELSERIES ENGINE
Manual
If you change gaming surfaces it is
recommended to recalibrate the lift off sensor.
To manually calibrate the lift off sensor, hold
down the CPI button for two seconds to force
04
recalibration. Your Rival 600 will flash white
three times when lift off calibration is complete.
support.steelseries.com
2s