HEIDENHAIN ND 1400 QUADRA-CHEK Installationsanleitung Seite 17

ND 1400 QUADRA-CHEK
Installation Instructions
Operating Instructions available at www.heidenhain.de
7. Operating elements
Front
Wide keys: Programmable for
A
frequently used functions
LCD touchscreen
B
Send key: Transmit measurement
C
data to PC, USB printer or USB drive
8. Initial power-up
To power-up the product:
Press the On (supply) side of the power switch to power-up the product. The startup
X X
screen is displayed.
9. Maintenance
The maintenance procedures described in these instructions may be required
during installation of the product. For additional maintenance information, refer to
the ND 1400 QUADRA-CHEK Operating Instructions.
Cleaning
Warning! Risk of electrical shock
While cleaning it is possible to conduct electricity from hazardous live parts if
liquid enters the product.
To avoid the hazard, always power off the product, disconnect the power cable
and never use a cloth that is dripping or saturated with water.
Notice
Never use abrasive cleaners, strong detergents or solvents to avoid damage to
the product.
To clean:
Verify that the power switch is in the off position
X X
Disconnect the power cable from the source of power
X X
Wipe exterior surfaces with a cloth dampened with water and a mild household
X X
detergent
All manuals and user guides at all-guides.com
Front (cont)
Numeric keypad: Enter numeric
D
data
Command keys: Control
E
measurement
LCD on/off key: Turn LCD on or off
F
or delete features from the feature
list.
17