Redmi Buds 3 Lite Benutzerhandbuch Seite 6

First-time Connection
Open the lid and take out the earbuds. When the indicators on both earbuds slowly blink
white, it means the earbuds can be connected. Enable the Bluetooth function on your phone,
and then search and tap "Redmi Buds 3 Lite" to connect the earbuds.
Note: If the earbuds cannot be connected, place them back into the charging case, close the
lid and repeat the above operation.
Connecting to Other Devices
Disable the Bluetooth connection of the paired phone or reset the earbuds to connect to
other devices.
Reset Earbuds
following steps to reset them. Make sure the charging case is not out of battery before reset.
Open the lid of the charging case and place both earbuds in the case. Press and hold the
multi-function touch areas on both earbuds for at least five seconds and then release.
Indicators on both earbuds will blink white three times, indicating the
earbuds have been reset successfully. (The connection records between the left and right
earbuds, and the earbuds and the phone have been cleared.)
Press and hold both earbuds for 5 seconds simultaneously
Function Overview
6