Troubleshooting - DwarfConnection DC-LINK-CLR1 Handbuch

Troubleshooting

Possible Cause
No video output Lack of power
Antennas
Video connection cable
Frequency selection
Unsupported video
format
Inadequate Connections
video quality
Range is too great or
signal is obstructed
Radio signal is
experiencing
interference
Possible Solution
Check power supplies of transmitter and
receiver and ensure that all cables are
connected correctly and that there is sufficient
power
Ensure antennas are not damaged and are
firmly connected
Examine the transmitter's "Video" LED display.
If the LED is dark, check the HDMI or SDI
connection cable
Ensure that the transmitter and receiver are set
to the same channel
Check your selected video format agains the
product's technical specifications
Check to ensure that all SDI or HDMI cables are
firmly connected
Check how many "RSSI" LEDs are lit on the
receiver. For decent quality, at least 2-3 LEDS
should be lit. If only one is lit, the signal is weak
and the distance between transmitter and
receiver should be reduced. Alternatively,
obstacles between the devices should be
removed or another channel selected
Wait one minute then restart transmitter and
receiver or change the frequency channel
15