uleFone ARMOR PAD 2 Benutzerhandbuch Seite 4

Device Layout
1. Power key / side fingerprint sensor
2. Customized button
3. Front camera
4. Light sensor
5. LED indicator light
6. Nano SIM / Micro SD card slot
7. Speaker
Charging the battery
Connect the supplied USB cable to the Type-C connector of the tablet. Connect the cable
to the adapter and connect the adapter to the outlet. The tablet begins to charge, and the
battery indicator is shown on the screen.
Note: Fully charge the battery during the first charge.
Long press the power key to turn on the tablet.
8. 3.5mm headphone jack
9. Type-C charging port
10. Flash
11. Rear camera
12. uSmart expansion connector
13. Volume button
4