Werbung
Verfügbare Sprachen
Verfügbare Sprachen
* In Bluetooth mode, press and hold HOME button for 5 seconds and the
controller will disconnect from the N-S / Android device.
Low Battery Warning
1. When the battery voltage is lower than 3.55V ± 0.1V, the current LED
indicator light will flash quickly.
2. When the battery voltage is lower than 3.45V ± 0.1V, the controller
will enter sleep mode automatically.
Turbo Function
1. Press any button (A/B/X/Y/L1/R1/L2/R2) which you want to set turbo
function and TURBO button at the same time to activate turbo function.
2. Press the button and TURBO button again at the same time to
deactivate turbo function.
* Turbo function means it will set a combo effect for the button you have
set.
Other Functions
1. This controller can also connect to N-S and PC (XInput) via USB cable.
2. Press and hold L1 and R1 buttons at the same time for 5 seconds to
turn on/ off the backlight. The backlight is on by default.
3. The sensor function only available when it connects to a N-S.
2
Werbung
