Werbung
Verfügbare Sprachen
Verfügbare Sprachen
SETTING UP
It is very important not to plug in the extension cord during installation. Install your extension cord in a shel-
tered area and within 60cm of a socket. Choose the ideal place to fix your reel on the wall, make sure that
the direction of installation is respected, then mark the future location of the dowels with a pencil on both
sides of the wall bracket
A. Drill the holes marked earlier using a drill and a suitable drill bit. The depth of the holes should be at
least the size indicated.
B. Once the 2 holes have been drilled, drive the
they stop and then tighten the nut with a 10mm spanner until the threaded rod is firmly anchored in the
wall. Repeat this step for the remaining fixings.
07/11/2023
.
1
1
2
2
Note : The roller can be installed on
other surfaces such as wood or hol-
low brick, however the hardware sup-
plied is only for solid walls, if you want
to install it on other supports than
those provided, you will need to pur-
chase the appropriate fasteners from
a DIY store or specialist hardware
store..
-piece expansion plugs (with nut and washers) in until
2
2
2
EN
21
1
1
1
1
Werbung
