Create BBQ COMPACT Bedienungsanleitung Seite 8

1. Insert 4 AA batteries in the space provided for this located under the body of the barbe-
cue.
2. You can pour some water into the inner container so that the barbecue produces less
smoke. In this way, removing the remaining fat from the product will be easier.
3. Fill the basket with charcoal according to the type and amount of food you are going to
use.
4. Put some fuel paste or fire starter gel around the two openings of the starter plate
5. Turn on the paste or gel.
6. Place the charcoal basket on the firing plate.
7. Turn on the fan and set it to full power.
8. Place the cooking grate over the body.
• It is recommended to heat the barbecue before first use and leave the charcoal to act for
30 minutes to eliminate any possible production residues.
• Remove ash and carbon residues before each use to obtain optimal air circulation and
therefore better cooking performance.
• Do not put too much fuel paste on the ignition plate to avoid damage to the fan box or other
parts of the barbecue.
• Use only charcoal or charcoal briquettes.
• Wait until the charcoal is covered with a thin layer of ash before placing food on the grill.
• Allow grill to cool completely before cleaning to remove ash and carbon residue.
• Clean the rack with warm, soapy water, then rinse and dry thoroughly with a soft cloth to
prevent rust.
• Do not use wire brushes, abrasive cleaners, or chemicals to clean the grill surface to avoid
damaging it.
• If possible, store the barbecue in a dry place.
• If the barbecue is exposed to the weather for a long time, use a suitable cover.
In compliance with the directives: 2012/19/EU and 2015/863/EU on the restriction of the use of hazardous substances in
electrical and electronic equipment, as well as their waste disposal. The crossed bin symbol shown on the packaging indicates
that the product at the end of its useful life will be collected as separate waste. Therefore, any product that has reached the
end of its useful life should be delivered to waste disposal centers specialized in the separate collection of waste electrical
and electronic equipment, or returned to the retailer when purchasing similar new equipment, in one for a base. Proper sepa-
rate collection for subsequent commissioning of equipment sent for recycling, treatment and disposal in an environmentally
compatible manner helps prevent possible negative effects on the environment and health and optimizes recycling and reuse
of waste. the components that make up the device. The abusive disposal of the product by the user implies the application of
administrative sanctions in accordance with the laws.
E NGL I SH
8
DEVICE USAGE
ADDITIONAL INSTRUCTIONS
CLEANING AND MAINTENANCE