OPER ATION MANUAL
PREMIUM HDMI SWITCH 4>1 4K | 3D | MHL
MANUAL OPERATION
The "POWER/SELECT" key is a multi function key. Press the button for 2 seconds to turn off the power Stand-
by). Press the "POWER/SELECT" key once to turn on the switcher. If you want to change the input channel
manually, you can only press the key once. There will be a LED for channel indication. The procedure is a
cyclic function When you selected the channel, there will be a LED on to present the channel. If you select
channel 1, the CH1 LED will light on.
CH1
CH2
TROUBLE SHOOTING
1. When there is no picture presented, please:
•
Make sure the direct connection from the source device to the display device without the HDMI
Switcher is working.
•
Check if all connectors are connected well; and check if all cables can support the transmission
speed. High Speed HDMI cables are recommended.
•
Check the power of HDMI Switcher (or reset the switcher)
2. When there is only picture displayed and without sound:
•
Check the cable connection to see if it fits properly.
•
Check your cable to see if it supports video transmission only (DVI) or it is damaged.
•
HDCP may not match very well at first connection; please reset your HDMI switcher.
•
Do you connect any output to your video recorder? HDCP will lock up audio part.
3. When resolution could not show in 4Kx2K:
•
Make sure your sources and displays are fully supporting 4K2K.
•
Make sure your HDMI cables are capable of transmit 4K2K video signal.
4. When 3D content could not be shown on your display:
•
Please make sure your sources and display are 3D supported devices and also support the same
3D format.
•
Please check if the Blu-ray player has been set 3D or AUTO play-mode for video output.
•
Please make sure the video content is 3D content.
12
CH3
CH4