Werbung
Verfügbare Sprachen
Verfügbare Sprachen
CONNECTION & OPERATION
1. Connect the HDMI cables from the sources devices to the input ports of the Switcher.
2. Connect the HDMI cable from your TV (or projector) to the output port of the Switcher.
3. Connect the 5VDC power adaptor to the HDMI Switcher.
4. After you finish the connections, the power indication LED (red), and port 1 input indication LED (green)
will be lighted on
NOTE:
Under standby mode, the HDMI switcher will memorize the latest input port. At your next use, the HDMI swit-
cher will detect and connect the latest input port first.
To reset the switcher, please unplug the power adaptor, or unplug the power cord from DC jack for a short
while; and then plug it back.
HDMI 3D video format:
Frame Packing:
1920 x 1080p bei 23,98/24 Hz
1280 x 720p bei 59,94/60 Hz
1280 x 720p bei 50 Hz
Side-by-Side (half):
1920 x 1080i bei 59,94/60 Hz
1920 x 1080i bei 50 Hz
Top-and-bottom:
1920 x 1080p bei 23,98/24 Hz
1280 x 720p bei 59,94/60 Hz
1280 x 720p bei 50 Hz
IR-REMOTE OPERATION
•
Use the power key on the IR remote to power on the HDMI switcher, the power indication LED on the
front panel will be lighted on. Press the power key one more time to turn the switcher to standby.
•
Use number buttons to switch between sources.
•
Use the View button and Press OK key to Preview input sources.
•
Use the PIP buttons and Press OK key to switch Picture in Picture sources.
OPER ATION MANUAL
PREMIUM HDMI SWITCH 4>1 4K | 3D | MHL
11
Werbung
