Werbung
Verfügbare Sprachen
Verfügbare Sprachen
However you cannot set up incorrect positions, e.g. play without both Kings or with more than one
King for each colour....etc. If the position is illegal, the word "Error" comes on display. The computer
will accept and execute castlings, pawn promotions and en passant captures if you play from a set up
board position.
Note: All previously stored moves are deleted as soon as you enter the SET UP mode.
12.A
Removing a Piece
If you wish to remove one or more pieces proceed as follows:
Press Ver / Set key twice, so that "Set" comes on display.
Remove the piece(s) one by one by applying gentle pressure on the square it stands on. The
Piece Symbol and the position of each square appear on display.
To end this mode press GO.
If necessary change colour via the COLOR key, then enter your next move or call-off a
computer move.
12.B.
Entering a Piece
If you wish to enter one or more pieces proceed as follows:
Press the Ver / Set key twice, so that "Set" comes on display.
You can change the colour of the piece(s) to be entered with the COLOR key.
Select the piece to be entered via the Piece Symbol Key and the respective Piece Symbol comes
on display.
Enter the piece by gently pressing it on the desired square.
Subsequent pieces of the same kind and same colour can be entered without using any further
function keys.
Only change colour or use the Piece Symbol Key if the piece varies from the preceding piece.
To end this mode press the GO key.
12.C. Moving a Piece to another Square
If you wish to change the position of one or more pieces whilst the game is in progress proceed as
follows:
Press the Ver/Set key twice, so that "Set" comes on display.
Move the piece(s) by pressing on the "from" and "to" square as in a normal move (the piece
symbol and square position is shown on the LCD display).
To end this mode press the GO key.
13.
CLEARING THE ENTIRE BOARD (Clear Key)
If you want to set up a board position it is best to clear the entire chessboard first. Remove all pieces
from the board and set up your new position without pressing down on any square; then enter this
position as follows:
Press the Ver/Set key twice.
Press the CLEAR key to delete the computer's memory (the LCD will display "Set").
14
Werbung
