Werbung
Verfügbare Sprachen
Verfügbare Sprachen
HOW TO AVOID DAMAGING SURFACES
12
WARNING
12.1 Using the appliance to wash tyres may damage the tyre and can be dangerous.
12.2 Never point the high pressure jet straight at the tyre.
12.3 Always use the appliance at the lowest pressure setting when cleaning in the vicinity of wheels and tyres.
12.4 Never use the "Turbo Lance" for washing any part of the vehicle.
12.5 For further information refer to section: "8.7 Recommended cleaning procedure".
We, COMAC S.p.A, declare that the following Machine(s):
Designation of machine
Model No.
Rated power
conform(s) to the following European Directives: 2006/42/EC, 2011/65/EU, 2012/19/EU, 2014/30/EU and 2000/14/EC (Italian Legislative Decree 262/2002)
and are (is) manufactured in accordance with the following standards or standardised documents: EN 60335-1; EN 60335-2-79; EN ISO 12100; EN ISO 14982,
IS0 3744.
Name and address of the person appointed to issue the technical file:
Giancarlo Ruffo / Via Maestri del Lavoro, 13 - 37059 Santa Maria di Zevio (VR), Italy
The conformity assessment procedure required by Directive 2000/14/EC has been performed in accordance with Annex V
Model No.
Measured sound power level:
Guaranteed sound power level:
Date: 22.12.2022
Santa Maria di Zevio - VR (I)
The validity of the warranty is in accordance with the relevant legislation in the country where the product is sold (unless otherwise stated by the producer).
The warranty covers materials, construction and conformity defects during the warranty period, during which time the manufacturer will replace defective
parts and repair the product if not excessively worn, or replace it.
The warranty does not cover components subject to normal wear and tear (valve, piston, water gasket, oil gasket, springs, O-rings, accessories such as the
hose, gun, brushes, wheels, etc.);
The warranty does not cover defects caused by or arising from:
- improper use, misuse, negligence,
- hire or professional use if the product has been sold for domestic use,
- failure to comply with the maintenance instructions provided in this manual,
- repair by unauthorised staff or centres,
- use of non-genuine parts or accessories,
- damage caused by transport, by dirt or foreign bodies, accidents,
- storage or warehousing problems.
Proof of purchase must be submitted to obtain warranty cover.
For assistance, contact the point of sale where your appliance was purchased
EC Declaration of Conformity
High pressure washer
CI C40 EM THERMIC
8,2 kW
CI C40 EM THERMIC
100,1 dB (A)
103 dB (A)
WARRANTY
15
English
EN
Giancarlo Ruffo
Werbung
