Werbung
Verfügbare Sprachen
Verfügbare Sprachen
- ENG -
With its Kid'Sleep My Lantern your child now has a fun nightlight that comforts it during the night and helps it to find its way in the dark
because of the automatic soft light it displays. To switch on your Kid'Sleep My Lantern, start by connecting the power cable on its stand.
Because the lantern is provided with a battery, it is automatically charged when it is put on top of the stand. A LED light shows that it is being
charged. You can leave your lantern on its stand for 24 hours continuously without any problems.
Select colour/function
When it is time to go to sleep (in the evening or afternoon nap), light up your Kid'Sleep My Lantern by pushing the handle. Each time you push,
a different light appears:
1.
Nightlight (only the "bunny" display lights up)
2.
White light
3.
Yellow light
4.
Blue light
To switch it off, push down the handle for 2 seconds or the required number of times.
When the child removes the lantern from its stand, it automatically displays a soft light to find its way in the dark, without being dazzled and
without your child having to switch it on; it's magic! When the lantern is not on its stand, only the white light can be switched on with two
different brightness settings. When the nightlight is put on its stand it automatically goes back to the initially selected light setting. N.B.: in case
of a power cut, the Kid'Sleep My Lantern will automatically switch to the soft light.
Switching on the lullaby
To switch on the lullaby, push the button on the stand. The lullaby plays for about 3 minutes and then shuts off automatically. To switch it off
while it is playing, push the button again.
Select lullaby/volume
The button
under the base allows you to select one of four lullabies: 2 melodies, a fountain, intra-uterine heartbeat.
With the "volume" button under the base you can adjust the volume. You have a choice of 3 sound levels.
CAUTION!
This product has to be installed away from any heating source such as radiators, heating systems or any other heating device (this list is not
exhaustive). Do not use this product near water. The power cord has to be placed in such a way that there is no risk of anyone tripping over it
or anything crushing or jamming it. Never attempt to repair this product yourself: please contact your retailer or Claessens'Kids for any
information if: - the product fell down or if the casing is broken or split; - the product was exposed to rain, water or any other liquid; - the
transformer, power cable, plug or any other part of the product is damaged. Do not use the product while it has not been repaired! This digital
class B device complies with the Canadian NMB-003 standard. Malfunctioning of the device may occur if it is subjected to interference from
radio frequencies. The device should work normally again when the interference has stopped. If this is not the case, it may be necessary to
disconnect and reconnect the device. In the unlikely case of electrostatic discharge, malfunctioning or loss of memory in the device may occur.
It may then be necessary to disconnect and reconnect the device.
N.B.
Caution: this device works on electricity. Never leave the Kid'Sleep My Lantern within reach of children younger than three years of age!
Risk of suffocation because of the presence of a power cord. The transformer has to be checked regularly to detect any signs of wear in the
cord, plug and socket, casing and all other parts. In case of wear the Kid'Sleep My Lantern must not be used with the transformer until the
latter has been repaired. The Kid'Sleep My Lantern must only be used with a transformer for toys with model number SHE0500200TE. We
cannot be held liable for a problem that may occur because of the use of a transformer model for toys other than the indicated transformer.
The transformer is not a toy! The Kid'Sleep My Lantern must not be connected with a power source of a higher capacity than the one
recommended. Disconnect the transformer before any intervention. Never clean the Kid'Sleep My Lantern with liquid! Remove and dispose
of any packaging before giving the device to children. Keep the necessary instructions. The colours and details may vary from the model
displayed on the box.
Protect the environment!
Your device contains several recyclable materials. Please do not put your device in the household waste to dispose of it, but take it
free of charge to a special centre for waste treatment of small electrical devices (sorting centre). Your device contains a non-
replaceable Ni-MH (3.6V – 300mAh) battery. When the battery life has ended, you have to remove it from the toy and take it to an
appropriate collection point for batteries and portable accumulators. To take out the battery, disconnect the device and unscrew the 3 screws
under the lantern. Open the device and carefully but firmly pull back the white plastic part. Cut the electric cables that hold this part. Then
unscrew the 2 screws alongside this white plastic part and remove the battery.
Made in China
All manuals and user guides at all-guides.com
www.claessens-kids.com
KID'SLEEP MY LANTERN (ITEM N°26015 and 26016)
5.
Red light
6.
Automatic changeover from one colour to another
7.
Switch off
CH- 1170 AUBONNE
Werbung
