Atlas Copco P2505 Produktanweisungen Seite 3

P2505
Product information
General information
WARNING Risk of Property Damage or Severe Injury
Ensure that you read, understand and follow all instructions before operating the tool. Failure to follow
all the instructions may result in electric shock, fire, property damage and/or severe bodily injury.
Read all safety Information delivered together with the different parts of the system.
►
Read all product Instructions for installation, operation and maintenance of the different parts of
►
the system.
Read all locally legislated safety regulations with regard to the system and parts thereof.
►
Save all safety information and instructions for future reference.
►
Safety signal words
The safety signal words Danger, Warning, Caution, and Notice have the following meanings:
DANGER
WARNING
CAUTION
NOTICE
Warranty
■ Product warranty will expire 12 months after the product is first taken into use, but will in any case ex-
pire at the latest 13 months after delivery.
■ Normal wear and tear on parts is not included within the warranty.
■ Normal wear and tear is that which requires a part change or other adjustment/overhaul during
standard tools maintenance typical for that period (expressed in time, operation hours or other-
wise).
■ The product warranty relies on the correct use, maintenance, and repair of the tool and its component
parts.
■ Damage to parts that occurs as a result of inadequate maintenance or performed by parties other
than Atlas Copco or their Certified Service Partners during the warranty period is not covered by the
warranty.
■ To avoid damage or destruction of tool parts, service the tool according to the recommended mainte-
nance schedules and follow the correct instructions.
■ Warranty repairs are only performed in Atlas Copco workshops or by Certified Service Partners.
Atlas Copco offers extended warranty and state of the art preventive maintenance through its ToolCover
contracts. For further information contact your local Service representative.
For electrical motors:
■ Warranty will only apply when the electric motor has not been opened.
ServAid
ServAid is a portal that contains the most up-to-date product information such as:
- Safety Information
- Installation, Operation and Service Instructions
DANGER indicates a hazardous situation which, if not avoided, will result in death or se-
rious injury.
WARNING indicates a hazardous situation which, if not avoided, could result in death or
serious injury.
CAUTION, used with the safety alert symbol, indicates a hazardous situation which, if
not avoided, could result in minor or moderate injury.
NOTICE is used to address practices not related to personal injury.
© Atlas Copco Industrial Technique AB - 9839 0886 00
EN Product information
3