Werbung
Verfügbare Sprachen
Verfügbare Sprachen
audiowerkstatt din-restarter v2
The audiowerkstatt din-restarter v2 helps you to stop and start the following "DIN-Sync"(also called "Sync24" or "Sync48")-device
in perfect synchronisation without stopping the masterclock.
Connectors:
9-12v:
Input for connecting a power supply [9-12V AC or DC (polarity doesn't matter)].
din-in:
Input for connecting the output of the DIN-Sync -masterclock.
din-out:
Output for connecting the input of the DIN-Sync -slave.
Function of the button and LED:
„
When you start the DIN-Sync24 -Sequencer connected to the din-in , the LED starts flashing every
"
Sync24 -Sequencer connected to the din-out is running.
„
When you press the red activate -button, the LED is inverted and the DIN-Sync24 -Sequencer connected to the din-out
stops at the start of the next bar and the LED goes out.
„
When you press the red activate -button again, the LED lights and the DIN-Sync24 -Sequencer connected to the din-out
starts at the start of the next bar in perfect synchronisation. The LED starts flashing again every
By holding the button when switching on, the device is started in "Sync48"-mode. It works the same as described before, but
receiving and transmitting DIN-Sync48 -signals at din-in and din-out instead of DIN-Sync24 -signals.
„
In this mode the activated -LED makes a continious double-flash .
Specifications:
Connectors:
Control elements:
Display elements:
Power:
Dimensions:
Weight:
Scope of delivery:
- audiowerkstatt din-restarter v2
- manual (german/english)
Contact:
audiowerkstatt UG (haftungsbeschränkt)
Weserstr. 78
12059 Berlin
Germany
info@audiowerkstatt.de
http://www.audiowerkstatt.de
WEEE-Reg.-Nr. DE 49518480
–
"
„
"
"
"
„
"
"
din-in (5-pol DIN)
din-out (5-pol DIN)
Power (Plug 5,5mm, Pin 2,1mm)
„
"
activate -button
„
"
Status-LED activated
9-12V AC or DC (Polarity doesn t matter)
112 mm x 72 mm x 48 mm
260 g
„
"
„
"
„
"
„
„
„
"
„
"
„
"
´
¼
-note and the DIN-
"
"
¼
-note.
„
"
„
„
"
„
"
Werbung
