Operating The Tv - Superior SP 2666 LCD Bedienungsanleitung

INITIAL SETTINGS / OPERATING THE TV
First of all choose Language and Country by using
and buttons. This will affect the sort process
/ /
in APS. To start APS, press the RED or "OK" button.
After APS is fi nalized, the programme table will appear
on the screen. In the programme table you will see
the programme numbers and names assigned to the
programmes.
If you do not accept the locations and / or the pro-
gramme names of programmes, you can change them
from the Program Menu. (See page 35)

OPERATING THE TV

You can operate your TV using both the remote control
handset and the buttons on the set.
Operating with the buttons on the TV set
Volume setting and programme selection can be made
by using the buttons on the control panel at the top of
the TV.
BDA_Superiour_SP2666LCD.indd 31 BDA_Superiour_SP2666LCD.indd 31
Volume Setting
Press the „VOLUME -" button to decrease volume or
the „+ VOLUME" button to increase volume, so a
volume level scale (slider) will be displayed at the
bottom of the screen.
Programme Selecting
Press the „+P/CH" button to select the next programme
or the „P/CH-" button to select the previous pro-
gramme.
Entering The Menu
Press the "MENU" button on the control panel at the
right side of the TV to enter the menu.
„+P/CH" / „PCH-" and „VOLUME -" / „+ VOLUME"
buttons on the TV are used as navigation buttons in the
menu.
AV Mode
Press the „TV / AV" button on the control panel at the
right side of the TV to switch your TV to EXT modes.
Operating With Remote Control
The remote control handset of your TV is designed to
control all the functions of your TV. The functions will
be described in accordance with the menu system of
your TV.
Functions of the menu system are described in Menu
System section.
Volume Setting
Press the "V +" button to increase volume. Press the
"- V" button to decrease volume. A volume level scale
(slider) will be displayed at the bottom of the screen.
Programme Selecting
(Previous or next programme)
• Press the "- P" button to select the previous
programme.
• Press the "P +" button to select the next programme.
Programme Selecting (direct access):
Press digit buttons on the remote control handset to
select programmes between 0 and 9. The TV will switch
to the selected programme after a short delay.
• For a two digit programme number enter the
second digit after pressing the fi rst digit within 2
seconds.
31
GB
15.03.2007 17:17:05 Uhr 15.03.2007 17:17:05 Uhr