Herunterladen Inhalt Inhalt Diese Seite drucken

Installation Instructions; Mechanical Installation - Autotek A690RXA Benutzerhandbuch

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

NOTE
Before you start with the installation of the sound system, disconnect necessarily the GROUND connection wire from the
battery to avoid any risk of electric shocks and short circuits.
• Choose a suitable location for your soundsystem, that neither the driver's field of vision nor the security of the inmates will be affected.
This stands also for airbag-zones and safety belts. The permanent temperature of the location should not be lower than -10°C and not
higher than 50°C. Protect the device from moisture and humidity.
• Ensure that your subwoofer enclosure will not get loose during the drive and hurt someone in the passenger cabin. It is recommended,
that you mount the subwoofer enclosure with suitable belts or any other mounting solutions in the trunk area.
• Please observe not to damage any serial components of your vehicle (airbags, wires, gastank etc.) during the installation of your
soundsystem by drilling or any other operations.
• Never screw or mount any other devices (amps, caps etc.) onto the subwoofer enclosure, this may cause damage to the electricity.
• For your personal concerns you should choose a appropriate sound level for the subwoofer enclosure, that neither the roadworthy of
the driver nor his concentration will be disturbed, that he is able to notice possible traffic noises and acoustical warning signals.
• Modern car audio soundsystems provide very high acoustic pressure beyond the 100 dB mark. Please observe in this case, that per-
manent use of high sound levels may cause damage to your ability of hearing.
• Please ensure by any means the correct polarity of all connections. Faulty installed and connected devices may get damage the vehicle
and the device permanently.
10

INSTALLATION INSTRUCTIONS

MECHANICAL INSTALLATION

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis