Genius SC30 Gebrauchsanleitung Seite 32

GB
ATTENTION!
When the lid is opened, the cooking process is interrupted and when the lid is closed it
„
immediately continues again.
To stop the cooking program, press the on/off button again.
„
To pause or add other ingredients during the cooking process, first bring the Air Fryer in the
„
upright position (Fig. 6). As soon as you press the button to open the lid, the preparation is
interrupted.
After closing the lid, the cooking programme is continued.
„
During preparation, the non-stick-coated cooking container rotates so that the food is evenly
„
browned/cooked from all sides.
Especially when using the tilt function, the food is turned in the cooking container via the
„
automatic rotation.
When the heating element reaches a certain temperature, it briefly pauses and starts automati-
„
cally again, as soon as it has cooled down a little. This process can be repeated several times
during preparation.
Once the pre-set preparation time has elapsed, an acoustic signal sounds.
„
Removing food:
When the lid is opened, the cooking process is interrupted and resumes when the lid is closed.
„
The cooking program has elapsed when the signal sounds.
„
If necessary, move the Air Fryer to an upright position (Fig. 6). Open the lid of the Air Fryer (Fig. 2).
„
ALWAYS use the handle provided to remove the cooking container from the device.
„
Unlock the handle by pulling the latch on the top back in the direction of the arrow.
„
Place the opened handle in one of the side recesses (right or left) on the edge of the cooking
„
container (Fig. 10).
Close the handle by turning the round knob in the direction of the arrow until
„
Now you can easily remove the container by the handle.
„
To avoid burns, do not touch the lid, splash guard or the cooking container!
„
To remove the other accessories (grid, pan, grill plate) use the tongs provided (also see overview of
„
accessories).
32
Instruction manual
.