Werbung
EN
6
/ Trouble Shooting
6.1 Possible Breakdowns Related to DISPLAY
Abnormal Phenomena
Power indicator does not
flash
No display on the screen
No signal
Images are blurred
Possible Solutions
1. Make sure power is on.
2. Check the socket and power cable.
1. Make sure power is on.
2. Correctly connect the cables.
3. If you connect the display with a laptop, please make sure the
display is on the right display mode: extend or duplicate mode.
4. Check whether the side indicator shows green, if not, it means
no signal in. Please reboot your computer or reconnect the
cable.
5. Is the signal wire broken or bent? If so, please replace the
signal wire.
1. Make sure the cables are well connected.
2. If you use a desktop, make sure the HDMI port is plugged into
the graphic card on the tower, but not into the motherboard.
3. If you use a Windows OS computer, make sure to press
''Windows+P'' on keyboard, then choose Duplicate or Extend.
Don't choose Computer Only or Projector Only.
4. If there is no HDMI port on your computer, you need an extra
HDMI adapter. We don't recommend a USB to HDMI adapter.
Also, we don't recommend a USB hub. We recommend DVI/
VGA/ Display Port/ Type-C/ Thunderbolt, etc. to HDMI adapters.
Please set the display resolution with 1920 x 1080.
32
GS1161/ GS1331
Werbung
