Herunterladen Diese Seite drucken

KKT KOLBE KKTWS01 Benutzerhandbuch Seite 24

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

Installation
Notes:
• If the device is not paired with the router,
the auto pairing mode is going to be started
when the device is powered on.
• If either the device is deleted by App,
or the device is factory reset by manual,
the auto pairing mode is also going to be started
in the next step.
2.3 Factory Reset
To reset the unit to factory settings, proceed as follows:
• Make Sure the WiFi stick have been powered on.
• Press and hold the Action Button for 10 seconds.
The NET LED on the WiFi stick will blink incrementally
fast
and will be lit solidly for 2 seconds after the factory
reset.
• However, the WiFi stick widget is still in the app.
To remove the widget from app, select "disconnect
and wipe data" on the edit page of the device in the
app according to the figure.
 Note:
Factory Reset will also reset other settings,
as follows:
• Delete the association settings.
• Restore the default configuration settings
include load type.
10
Cancel

Werbung

loading