Blaupunkt Dresden RCR 128 Bedienungsanleitung Seite 21
Vorschau ausblenden
Andere Handbücher für Dresden RCR 128:
- Bedienungsanleitung (19 Seiten) ,
- Einbauanleitung (19 Seiten) ,
- Serviceanleitung (38 Seiten)
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
'Quick reference
G) REL
To release the detachable panel (theft
protection).
Press this knob and remove the
release panel.
(2) ON - Power up/down
Press this button to turn the equipment
on. It will play at the preset volume. If
you press this button briefly during ra-
dio reception, the volume will turn
down instantly (MUTE).
This function is cancelled by pressing
the ON button again. You can pro-
gramme the mute volume (refer to
"DSC programming').
Press the button for about 2 seconds
to turn the unit off.
Switching on/off via the ignition:
if the set has been connected corre-
spondingly, it can also be turned on
and off with the vehicle ignition.
Press the ON button to keep on oper-
ating the set when the ignition is
switched off.
The set will switch on. To avoid that
the battery goes flat, the system will be
turned off automatically after one hour
of playback.
(3) Volume knob
Turn the knob to set the volume.
() & Eject
Press this button to eject the cassette.
(S) Cassette slot
Insert the tape into the slot with the
open side showing to the right. The
tape will be played in the direction pre-
viously selected.
(6) Display
Displays all settings, operating modes
and functions.
@) <I< Fast winding
To fast rewind the tape for direction
"TAPE 1".
To fast forward the tape for direction
"TAPE 2".
>D> Fast winding
To fast forward the tape for direction
"TAPE 1".
To fast rewind the tape for direction
"TAPE 2".
(7) + (8) Reversing the tape (PROG)
Press both buttons simultaneously.
(9) Rocker switch
Radio mode
A/V
Seek tuning
A
Up
Vv
Down
<</>>
Up/down in short intervals
(on FM only if ,AF* is off)
For FM only:
<</>>
Scrolling through the broadcasting
networks, if AF is on. Example:
NDR 1, 2, 4, N-Joy, FFN ...
Extra function of rocker switch:
For additional settings use
AUD
DSC-MODE
@))
PTY
(12)
Requirement: The respective function
P
is activated.
:
SRC/SC
(SRC = audio source, SC = scan)
Press buiton briefly to select the oper-
=
ating mode (tuner, cassette). The ac-
tive mode appears in the display.
21
Werbung
