Werbung
PS.: Pushing the button for a long time means going out from the position of the time adjusted
Cooking ( automatic) . ( Please see the revelant pharagraph below) .
TIME ADJUSTMENT:
You can step in the time adjustment menu by pushing
and the clock is setting up by the
makes the clock set up quickly. The clock adjustment mode will end after around 5 seconds by
Itself.
YOGHURT FERMENTATION FUNCTION:
Yoghourt fermentation function ,if there is no cooking function in use, is getting started by
Button and ,
symbol alerts and by the same
As a default factory adjustment the fermentation has been set as 5 hours. The remaining time
For the fermentation is shown on the time screen. Unless
screen) , user can adjust the remaining time.
In order to change the duration of the fermentation:
Press the button
it will start flashing
Adjust the duration by pressing the
under 5 hours or over 10 hours)
When the fermentation process is finished, the alarm will sound and the
flashing on the screen. By pressing the
the duration.
EXCEPTIONS:
If the oven temperature is over 60 C the fermentation process will not start. You will hear a
warning tone and the phrase "hot" will be visible on the screen.
When power is cut off during fermentation, 3 beeps will sound and the remaing time (before the
electricity was cut off)
As mentioned above, the
remaining duration.
KEEPING WARM FUNCTION
The keeping warm function will be activated when pressing the
icon on the screen. With this function, the oven temparature will be 80 C and will be kept
constant, however the temperature will not be indicated on the screen. Changing the
temperature is not possible (the
this function will be canceled
SETTING THE COOKING HEAT:
Besides the yogurt and keeping warm function you can use it for cooking as well. When pressing
The button, the
C
By pressing
and
a set temperature, the preset factory temperature of 190 C will appear)
In order to switch off the temperature indication on the screen or to disable it, press and hold
C
the
button. The temperature will disapear and the oven heaters will turn off.
PERSONOLIZING THE FACTORY HEAT SETTINGS:
In order to change the preset factory temperature of 190 C, press
until you hear a short beep.
GB
button, pushing these buttons for a long time
.
button on the screen (the duration cannot be set
button you can terminate the process or change
M
will appear flashing.
button can be used to terminate the fermentation or to change the
C
button is non-functional) By pressing the
.
icon will start flashing next to the temperature.
you can set the temperature between 50 C and 230 C (if you don't have
M
button 3 times.
button it ends.
button is cancelled (
button. You will see the
C
C
and
9
starts blinking
is on the
icon will start
button again,
M
at the same time
Werbung
