En User Manual; Technical Specification - peme ice-on go M Bedienungsanleitung

EN User Manual

Dear User,
To reduce the risk of failure, electric shock, injuries, fire and product
damage, read all the instructions and warnings in this manual thoroughly
before you use the device.
This manual contains important information on the device safety, use and
maintenance. Keep it for future use of maintenance information.

TECHNICAL SPECIFICATION

Product
description
Model
Go M
Voltage
Power
Sound level
Energy label
Temperature
from 25°C below ambient temperature up to +
range
Dimensions
570 x 310 x 310 mm
Net weight 5,4 kg
DESCRIPTION AND DESIGNED USE
• The device is designed for keeping the products placed in it at a preset
temperature.
• PLEASE NOTE! The device is not designed for cooling down hot
products or heating cold ones.
• The cooling temperature is 25°C below the ambient temperature.
• The heating temperature is max. 65°C.
• The product uses the thermoelectric technology (uses Peltier effect)
thanks to which, contrary to compressor and absorption devices, it is
lightweight, silent and does not pollute the environment.
• The portable cooler box cannot replace a household fridge as it uses a
different cooling technology and its performance is based on changing
ambient parameters. All the same, the parameters, performance and
operation method of the two devices are not comparable.
ENVIRONMENT
The device is delivered in a package to protect it against any possible
transport damage. The packaging is made from non-processed material
and can be recycled. Throw the materials to appropriate colour containers
for selective waste collection.
Protect the environment and do not throw used batteries into
household wastes. Return them to the point of sale or a special recycling
centre.
Used electrical equipment (including the computer and power supply) are
recyclable. Do not throw them out with household waste as they may
contain substances dangerous to the health and environment. You can
actively contribute to sustainable use of natural resources and the
protection of the natural environment by handing the used device to a
recycling centre for used electrical devices.
SAFETY
PLEASE NOTE! The device should always be used in line with its
designed use, i.e. for cooling or heating packed products. Any other use
of the device can be dangerous. The manufacturer cannot be held liable for
any losses caused by incorrect use of the device.
• Do not use the device if it is visibly damaged.
• The device was designed and built based on the cutting-edge knowledge
concerning safety. Any dangerous components likely to result in any
damage were eliminated or protected.
• Always place the device on a cool, stable and level surface. The
maximum long-term tilt of the device is 5 ° with the permissible short-
term tilt of up to 45 °.
• Do not drop the device.
• Do not immerse the cable, plug or the whole device in water or other
liquids. Do not expose the device to weather conditions and do not use
it in increased humidity or near heat sources.
• Check the device power supply cable and the ports for damage
periodically. If the cable is damaged, the device was dropped, the plug is
loose or the device operates incorrectly in any way, stop using it
immediately. Take the damaged device to an authorised service
workshop for repair.
• Protect any ventilation openings from dust and debris, do not place any
objects in them.
Portable cooler box
Go L
DC 12 V or AC 220~240 V
DC 48-55W or AC 60-71W
45 dB
F
65 ° C
562 x 310 x 355 mm
6,5 kg
• Exercise utmost care and do not allow children or people not familiar
with the device operation to use the device without supervision.
• Any repairs and structural modifications (including dismounting original
parts, installing parts not supplied by the manufacturer etc.) shall
invalidate the warranty and can result in a direct hazard for the user. Any
device modifications can be carried out solely by the manufacturer's
technicians or people having relevant training.
All devices are subject to regular innovation activities to ensure their high
quality. This is why the manufacturer reserves the right to introduce
technical modifications.
If you have any questions or doubts concerning this equipment, contact the
specialist dealer.
PLEASE NOTE! Any people in the vicinity of the used device should be
warned of the possible hazards. Exercise particular care in the presence of
children.
PLEASE NOTE! Follow general regulations and safety
measures in force for handling electrical devices.
• The device is supplied with 230V or 12V from the vehicle system.
• Remove the plug from the battery socket when you no longer use the
device.
• The device cable cannot hang down from the table edge or touch any hot
surface as it may get damaged.
• Check the cable and power sockets in the device periodically. The cable
should not be damaged and the plug must not be loose. Stop using the
device if any component operates incorrectly and take the device to an
authorised service workshop for repair.
• Ensure the power supply cord is not crushed and its location does not
create a risk of tripping over.
• Disconnect the power cord before cleaning the device.
• Do not use sharp tools to remove ice from the sides. Leave the
refrigerator unpowered and open to defrost it.
• If the device will not be used for a long time, turn it off, disconnect the
power cord, defrost it, clean, wipe dry, and leave the lid open to prevent
moulding.
• PLEASE NOTE! Never modify the electrical grid yourself. Always request
qualified electricians to introduce such modifications.
• PLEASE NOTE! Remember to unplug the device before you start any
repairs, maintenance or cleaning.
• Do not use any extension cords to connect the device.
CAUTION! If you are using your device in a car: do not plug the power cable
until the engine runs to avoid a short circuit.
PLEASE NOTE! Switch the device on any time you start the vehicle motor.
The device switches off automatically once you switch off the motor.
PLEASE NOTE! Never connect two power supply cables at the same time
and do not change the power source when the device is on. To change the
power source, switch the device off, disconnect the power cable, connect
a new one, and switch the device on.
ELECTRICAL CURRENT
The device meets 2nd insulation class and does not require grounding.
DANGER! Incorrect connection of the cable may bring about the risk of
electric shock.
• Before you plug the device to the mains, ensure the local voltage
conforms to the plug type.
• Do not modify the plug if it is not compatible with the socket. In such
circumstances request a qualified electrician to install another socket.
OPERATING CONDITIONS AND TIPS
To achieve optimum performance of the device:
• Place frozen products in the cooler box to save the cooling time.
• To increase the cooler box performance, put ice packs in it.
• Protect the device from weather, i.e. rain, direct sunlight or moisture. Do
not leave the device in a hot vehicle. Whenever possible, place the device
in a shade, on a cool and level surface.
• Do not obstruct the inner ventilation grille with products. Try to arrange
the products to ensure air circulation. Protect external ventilation
openings from dust and debris. Do not put any objects on them.
• Keep all food products in their original or extra packagings to prevent
mixing of odours, condensation or frost.
• During a stop, do not supply the cooler box using the lighter socket for
more than 3 hours. This can result in excess battery discharge.
EN
5