LIZARD Z Serie Bedienungsanleitung Seite 9

SUPPORTED INPUT SIGNALS
2
2.1 VIDEO MODE SUPPORT
FHD Controller series can support any video mode within the following input constraints:
• Signal sample frequency with the input ≤ 80MHz
• Horizontal sync frequency between 30KHz and 80KHz
Modes are detected with the presentation of the input and previous alignments for setup are
Automatically recalled. The emulation of a true multi-sync monitor is implemented.
The factory preset supported modes are as follows:
MODE RESOLUTION
VGA 640 x 350
VGA 720 x 400
VGA 640 x 480
VGA 640 x 480
VGA 640 x 480
SVGA 800 x 600
SVGA 800 x 600
SVGA 800 x 600
XGA 1024 x 768
XGA 1024 x 768
XGA 1024 x 768
SXGA 1280 x 1024
SXGA 1280 x 1024
WXGA 1280 x 768
WXGA 1366 x 768
WSXGA 1440 x 900
WSXGA 1680 x 1050
WUXGA 1920 x 1080
Notes:
• All mentioned modes are non-interlaced. The maximum and minimum frame rates are
determined by the TFT-LCD.
• Factory preset modes are overwritten by additional user alignments for automatic recall.
The factory preset modes can be recalled at any time.
REFRESH RATE H-FREQ.
70Hz 31.47KHz
59.940Hz 31.469KHz
60Hz 31.5KHz
72Hz 37.9KHz
75Hz 37.5KHz
60Hz 37.9KHz
72Hz 48.1.47KHz
75Hz 46.9KHz
60Hz 48.4KHz
70Hz 56.5.47KHz
75Hz 60KHz
60Hz 64KHz
75Hz 80KHz
60~75Hz 47.7~65KHz
60~75Hz 47.7~65KHz
60~75Hz 65KHz
60Hz 70KHz
60Hz 95KHz
MNL304
PIXEL FREQ. REMARKS
25.175MHz Standard VESA
25.175MHz IBM VGA 3H
25.175MHz Standard Industria
31.500MHz Standard VESA
31.500MHz Standard VESA
40.000MHz VESA linee guida
50.000MHz Standard VESA
49.500MHz Standard VESA
65.000MHz VESA linee guida
75.000MHz Standard VESA
78.750MHz Standard VESA
108.000MHz Standard VESA
135.000MHz Standard VESA
80.140MHz Non Standard
80.000MHz Non Standard
150.000MHz Non Standard
150.000MHz Non Standard
190.000MHz Non Standard
9